• The resistant cutting wire reaches the temperature of a few hundred Celsius degrees during EPS cutting. To ensure it is properly tensioned throughout the cut, UnionTech offers various wire tensioning systems - spring, pneumatic or electric - depending on the machine size and application.


    WORKING WIDTH = CUTTING WIRE LENGTH
    60-300 cm
    WORKING LENGTH
    130-300 cm
    WORKING HEIGHT
    128 cm
    MAX. TRANSIT SPEED
    3000 mm/min 
    5000 mm/min in Ind. Axis Units
    CUTTING WIRE
    0.15-0.55 ,

    NiCr or TitaniumWire, 

    spring or electric-tensioned

    X & Y DRIVES
    stepper motors + cog belts
    SOFTWARE RESOLUTION
    0.005 mm
    OPTIONAL ACCESSORIES
    TurnTable
    Lathe
    ShapeWire Bar
    DoubleWire
    Independent Axis Control
    Pneumatic Wire Tensioning
    TitaniumWire
    Handheld/Remote Controller
    NOT AVAILABLE
    5-wire MW add-on (OF only)
    BarCode Scanning
    POWER REQUIREMENTS
    230V, 50Hz, from 500W up to 1kW
    PC REQUIREMENTS
    Windows XP, Vista, 7, 8 or 10

    Cutting wires

    TITANIUM WIRE. BEST RESISTANT EVER

    SOFTWARE
    iXshaper with unlimited free updates
    WARRANTY
    complete 2-year warranty
    INCLUDED IN THE PRICE
    hot wire cutting machine,
    ARM-based electronic controller,
    iXshaper software with unlimited free updates,
    a 100-gram spool of cutting wire,
    remote controller/handhels,
    assembly and operational manuals,
    year-round tech support,
    NOT INCLUDED IN THE PRICE
    Windows PC necessary to control the machine
    graphics software, e.g. CorelDraw
    installation and training on site (if required)


    IXSHAPER FOR ALL OUR HOTWIRE CUTTERS.


    - extreme easy of use yet lots of powerful features
    - will work on any Windows PC with USB, including Windows 10
    - available in 11 different languages
    - complex 3D cuts made simple

    - auto object-linking, continuation, duplication, simulation, etc.

    SUPPORTED DRAWING FORMATS:
    HPGL.plt (e.g. CorelDraw), dxf (e.g. AutoCad), RAW 3D (e.g. Rhinoceros 3D), EPS/AI (e.g. AdobeIllustrator), dxf 3D (e.g. AutoCad)


  • Machine details:


    11.jpg

    		"Z" = MACHINE WIDTH = CUTTING WIRE LENGTH
    This dimension determines e.g. the max. length of your 2D moulding.

    "X" = MACHINE LENGTH
    This dimension determines. e.g. the max. length of your column cut on the lathe.

    "Y" - MACHINE HEIGHT
    This dimension (always around 1220-1300 mm) determines the max. height of the EPS block that will fit on the machine.
    1 OR 2 CUTTING WIRES OF UP TO 300 CM LENGTH
    MULTIPLE SIZES AND CONFIGURATIONS AVAILABLE
    OPTIONAL UNIQUE INDEPENDENT AXIS CONTROL FEATURE
    MULTIPLES 3D OPTIONS (TURNTABLES, LATHES, ETC.)
    MAX. TRANSIT SPEED OF UP TO 5 METERS/MIN.
    VARIOUS WIRE TENSIONING OPTIONS: SPRING, ELECTRIC, PNEUMATIC

    22.jpg

    33.jpg

    REMOTE CONTROL/HANDHELD

    convenient overview of current machine parameters: wire location,
    wire heating status and power, wire tension (independent axis control units), limit swiches status;
    on-the-fly adjustment of parameters during a cut: increase/decrease wire temperature, increase/decrease cutting speed,
    start/stop/continue a cut;
    full manual control of machine movement in all axes,

    IXSHAPER FOR ALL OUR HOTWIRE CUTTERS

    - unlimited FREE UPDATES for all UnionTech customers;
    - extreme easy of use yet lots of powerful features;
    - will work on any Windows PC with USB, including Windows 10;
    - available in 11 different languages;
    - complex 3D cuts made simple;

    - auto object-linking, continuation, duplication, simulation, etc.

    SUPPORTED DRAWING FORMATS:
    HPGL.plt (e.g. CorelDraw), dxf (e.g. AutoCad), RAW 3D (e.g. Rhinoceros 3D), EPS/AI (e.g. AdobeIllustrator), dxf 3D (e.g. AutoCad)

    44.jpg



  • 3D FEATURES

    Here are some of the additional features of our Hot Wire Foam Cutters.

    TURNTABLE

    3D cuts out of 3D models or a series of 2D files
    can cut any symmetrical or irregular shape
    completely automatic mode & full manual control
    works with the straight cutting wire and also ShapeWire
    support for plt, dxf, EPS/AI, RAW 3D and dxf 3D
    powerful and precise movement mechanism
    easy to use yet offering unlimited possibilities 
    up to 3 TurnTables on the same machine

    蜡烛-1.jpg

    螺丝-1.jpg

    LATHE 


    perfect for columns and balusters
    easy-to-use with built-in rotary and lathe modes
    supports the straight cutting wire as well as ShapeWire
    create creative twisted shapes 
    grooves, threads and similar 3D features
    powerful and precise mechanism
    software-controller but also full manual control
    up to 3 Lathes on the same machine

    SHAPEWIRE BAR

    temporarily replaces the straight wire to produce interesting rotary shapes
    works with both TurnTable and Lathe
    perfect for grooves, threads and similar shapes
    1 mm thick shapeable wire (reusable)
    will heat up to 50 cm long pieces of shapewire bar
    easy to install and remove when not needed

    仿形1.jpg




CNC Hot wire Foam Cutting Machine with iXShaper
Imported iXShaper control system
4axis/ 7axis.